Add a VictoriaLogs cluster and point logs-ingest at it (#488)

The k8s log pipeline stores to ClickHouse via NATS+vector, while the VM estate ships journald to a separate puppet-managed VictoriaLogs cluster. Consolidating on VictoriaLogs in-cluster collapses the two paths, and the logs-ingest gateway has no clients yet so it can be repointed now, ahead of the puppet change.

- add VLCluster `logs` at v1.52.0 (2 vlinsert, 2 vlselect, 3 vlstorage, 180d retention, 250Gi each on cephrbd-fast-delete)
- cap vlstorage disk use at 220GiB per node so 180d stays time-based rather than disk-bound
- repoint the logs-ingest HTTPRoute at `vlinsert-logs:9481`
- add a VictoriaLogs Grafana datasource and install its plugin

Nothing is removed here; NATS, ClickHouse, vector, logarchiver and logviewer keep running until a follow-up drops them.

Reviewed-on: #488
Co-authored-by: unkin-agent <unkin-agent@unkin.net>
Co-committed-by: unkin-agent <unkin-agent@unkin.net>

apps/base/authentik/cnpg_cluster.yaml

@@ -64,8 +64,12 @@ spec:
       archive_mode: "on"
       archive_timeout: 5min
       dynamic_shared_memory_type: posix
-      effective_cache_size: 256MB
+      effective_cache_size: 1536MB
       full_page_writes: "on"
+      # Replicas report their oldest xmin to the primary, so multi-second reads on
+      # a hot standby stop exhausting max_standby_streaming_delay and being
+      # cancelled. Retained-dead-tuple cost is negligible on a ~155MB database.
+      hot_standby_feedback: "on"
       log_destination: csvlog
       log_directory: /controller/log
       log_filename: postgres
@@ -77,7 +81,12 @@ spec:
       max_parallel_workers: "16"
       max_replication_slots: "16"
       max_worker_processes: "16"
-      shared_buffers: 128MB
+      # A pg_stat_statements.* parameter is what makes CNPG treat the extension as
+      # managed and run CREATE EXTENSION in every database; preloading alone does
+      # not create it.
+      pg_stat_statements.max: "10000"
+      pg_stat_statements.track: top
+      shared_buffers: 512MB
       shared_memory_type: mmap
       ssl_max_protocol_version: TLSv1.3
       ssl_min_protocol_version: TLSv1.3
@@ -86,6 +95,9 @@ spec:
       wal_log_hints: "on"
       wal_receiver_timeout: 5s
       wal_sender_timeout: 5s
+    # CNPG merges this with the libraries it manages itself.
+    shared_preload_libraries:
+      - pg_stat_statements
     syncReplicaElectionConstraint:
       enabled: false
   primaryUpdateMethod: restart
@@ -105,13 +117,16 @@ spec:
     updateInterval: 30
   resources:
     limits:
-      cpu: 500m
+      # 500m is a 50ms CFS quota per 100ms period, exhausted by bursts even at
+      # ~0.01 cores average, so every query pays throttle latency.
+      cpu: "2"
       # 512Mi OOMKilled replicas under load (shared_buffers 128MB +
       # max_connections 200 leave no headroom) — see incident 2026-07-28.
-      memory: 1Gi
+      # shared_buffers 512MB needs the same headroom multiple, hence 2Gi.
+      memory: 2Gi
     requests:
-      cpu: 50m
+      cpu: 500m
-      memory: 512Mi
+      memory: 1Gi
   smartShutdownTimeout: 180
   startDelay: 3600
   stopDelay: 1800

apps/base/authentik/httproute.yaml

@@ -37,6 +37,22 @@ spec:
       name: authentik
       sectionName: https
   rules:
+    - backendRefs:
+        - group: ""
+          kind: Service
+          name: authentik-server
+          port: 80
+          weight: 1
+      filters:
+        - type: URLRewrite
+          urlRewrite:
+            path:
+              type: ReplaceFullPath
+              replaceFullPath: /application/o/token/
+      matches:
+        - path:
+            type: Exact
+            value: /application/o/token
     - backendRefs:
         - group: ""
           kind: Service
@@ -86,6 +102,22 @@ spec:
       name: authentik-internal
       sectionName: https
   rules:
+    - backendRefs:
+        - group: ""
+          kind: Service
+          name: authentik-server
+          port: 80
+          weight: 1
+      filters:
+        - type: URLRewrite
+          urlRewrite:
+            path:
+              type: ReplaceFullPath
+              replaceFullPath: /application/o/token/
+      matches:
+        - path:
+            type: Exact
+            value: /application/o/token
     - backendRefs:
         - group: ""
           kind: Service

apps/base/authentik/kustomization.yaml

@@ -19,6 +19,7 @@ resources:
   - redis-deployment.yaml
   - redis-pvc.yaml
   - redis-service.yaml
+  - server-vmpodscrape.yaml
   - vaultauth.yaml
   - vaultstaticsecret.yaml
   - vmpodscrape.yaml

apps/base/authentik/server-vmpodscrape.yaml

@@ -0,0 +1,16 @@
+---
+# Scrape the authentik server's django_prometheus endpoint (:9300). Picked up
+# by the observability VMAgent (selectAllByDefault).
+apiVersion: operator.victoriametrics.com/v1beta1
+kind: VMPodScrape
+metadata:
+  name: authentik-server
+  namespace: authentik
+spec:
+  selector:
+    matchLabels:
+      app.kubernetes.io/name: authentik
+      app.kubernetes.io/component: server
+  podMetricsEndpoints:
+    - port: metrics
+      path: /metrics

apps/base/bind-external/kustomization.yaml

@@ -7,4 +7,5 @@ resources:
   - cluster.yaml
   - tsigkey.yaml
   - zones.yaml
+  - records.yaml
   - agent-dns-rolebinding.yaml

apps/base/bind-external/records.yaml

@@ -0,0 +1,36 @@
+# Authoritative delegation records for acme.unkin.net. Without these the zone
+# only holds the operator's seed apex (NS ns1.acme.unkin.net glued to the
+# primary pod IP), which is unroutable off-cluster and goes stale on
+# reschedule. DNSRecords must live in the same namespace as their BindZone.
+---
+apiVersion: bind.unkin.net/v1alpha1
+kind: DNSRecord
+metadata:
+  name: acme-apex-ns
+  namespace: bind-external
+spec:
+  zoneRef: acme-unkin-net
+  # "@" is the zone apex.
+  name: "@"
+  type: NS
+  ttl: 3600
+  values:
+    # Matches the parent delegation in Google Cloud DNS. Out of zone, so the
+    # child needs no glue of its own.
+    - acme-ns1.unkin.net.
+---
+apiVersion: bind.unkin.net/v1alpha1
+kind: DNSRecord
+metadata:
+  name: acme-ns1-a
+  namespace: bind-external
+spec:
+  zoneRef: acme-unkin-net
+  name: ns1
+  type: A
+  ttl: 3600
+  values:
+    # Public address of this cluster's external BIND, same target as
+    # acme-ns1.unkin.net. Resolvers that cached the seeded ns1.acme.unkin.net
+    # NS name must still reach the zone.
+    - 103.216.191.185

apps/base/bind-external/zones.yaml

@@ -17,3 +17,14 @@ spec:
   updateKeyRef: certmanager
   allowTransfer:
     - key certmanager
+  # Published apex NS. acme-ns1 is what the parent delegates to and glues; ns1 is
+  # in-zone, so its address is declared below or a reseed would glue it to the
+  # primary pod IP.
+  nameservers:
+    - acme-ns1.unkin.net.
+    - ns1.acme.unkin.net.
+  records:
+    - name: ns1
+      type: A
+      ttl: 3600
+      values: ["103.216.191.185"]

apps/base/bind-system/deployment.yaml

@@ -21,7 +21,7 @@ spec:
         runAsNonRoot: true
       containers:
         - name: operator
-          image: artifactapi.k8s.syd1.au.unkin.net/docker-internal/bind-operator:v0.2.6
+          image: artifactapi.k8s.syd1.au.unkin.net/docker-internal/bind-operator:v0.3.0
           args:
             - --metrics-bind-address=:8080
             - --health-probe-bind-address=:8081

apps/base/bind-system/kustomization.yaml

@@ -6,7 +6,7 @@ resources:
   - namespace.yaml
   # CRDs are pulled from the bind-operator repo at the matching tag rather than
   # vendored here, so they never drift from the operator.
-  - https://git.unkin.net/unkin/bind-operator/raw/tag/v0.2.6/config/crd/install.yaml
+  - https://git.unkin.net/unkin/bind-operator/raw/tag/v0.3.0/config/crd/install.yaml
   - rbac.yaml
   - agent-dns-rbac.yaml
   - deployment.yaml

apps/base/cert-manager/certificate_wildcard-ceph-unkin-net.yaml

@@ -0,0 +1,26 @@
+---
+# Let's Encrypt *.ceph.unkin.net wildcard for the haproxy edge (ceph dashboard).
+# DNS-01 needs the delegated _acme-challenge.ceph.unkin.net CNAME in the public
+# unkin.net zone.
+# _acme-challenge.ceph.unkin.net. CNAME _acme-challenge.ceph.acme.unkin.net.
+apiVersion: cert-manager.io/v1
+kind: Certificate
+metadata:
+  name: wildcard-ceph-unkin-net
+  namespace: cert-manager
+spec:
+  secretName: wildcard-ceph-unkin-net-tls
+  secretTemplate:
+    annotations:
+      reflector.v1.k8s.emberstack.com/reflection-allowed: "true"
+      reflector.v1.k8s.emberstack.com/reflection-allowed-namespaces: "haproxy"
+      reflector.v1.k8s.emberstack.com/reflection-auto-enabled: "true"
+      reflector.v1.k8s.emberstack.com/reflection-auto-namespaces: "haproxy"
+  privateKey:
+    size: 4096
+  dnsNames:
+    - "*.ceph.unkin.net"
+  issuerRef:
+    name: letsencrypt
+    kind: ClusterIssuer
+    group: cert-manager.io

apps/base/cert-manager/certificate_wildcard-main-unkin-net.yaml

@@ -0,0 +1,26 @@
+---
+# Let's Encrypt *.main.unkin.net wildcard for the haproxy edge (pve, arr stack,
+# jellyfin, stalwart webadmin/autoconfig). DNS-01 needs the delegated
+# _acme-challenge.main.unkin.net CNAME in the public unkin.net zone.
+# _acme-challenge.main.unkin.net. CNAME _acme-challenge.main.acme.unkin.net.
+apiVersion: cert-manager.io/v1
+kind: Certificate
+metadata:
+  name: wildcard-main-unkin-net
+  namespace: cert-manager
+spec:
+  secretName: wildcard-main-unkin-net-tls
+  secretTemplate:
+    annotations:
+      reflector.v1.k8s.emberstack.com/reflection-allowed: "true"
+      reflector.v1.k8s.emberstack.com/reflection-allowed-namespaces: "haproxy"
+      reflector.v1.k8s.emberstack.com/reflection-auto-enabled: "true"
+      reflector.v1.k8s.emberstack.com/reflection-auto-namespaces: "haproxy"
+  privateKey:
+    size: 4096
+  dnsNames:
+    - "*.main.unkin.net"
+  issuerRef:
+    name: letsencrypt
+    kind: ClusterIssuer
+    group: cert-manager.io

apps/base/cert-manager/certificate_wildcard-unkin-net.yaml

@@ -14,9 +14,9 @@ spec:
   secretTemplate:
     annotations:
       reflector.v1.k8s.emberstack.com/reflection-allowed: "true"
-      reflector.v1.k8s.emberstack.com/reflection-allowed-namespaces: "cheeztv,arrstack,authentik,gitea,watchstate,mediamark,repospawner"
+      reflector.v1.k8s.emberstack.com/reflection-allowed-namespaces: "cheeztv,arrstack,authentik,gitea,watchstate,mediamark,repospawner,haproxy"
       reflector.v1.k8s.emberstack.com/reflection-auto-enabled: "true"
-      reflector.v1.k8s.emberstack.com/reflection-auto-namespaces: "cheeztv,arrstack,authentik,gitea,watchstate,mediamark,repospawner"
+      reflector.v1.k8s.emberstack.com/reflection-auto-namespaces: "cheeztv,arrstack,authentik,gitea,watchstate,mediamark,repospawner,haproxy"
   privateKey:
     size: 4096
   dnsNames:

apps/base/cert-manager/kustomization.yaml

@@ -12,3 +12,5 @@ resources:
   - clusterissuer_letsencrypt.yaml
   - clusterissuer_letsencrypt-staging.yaml
   - certificate_wildcard-unkin-net.yaml
+  - certificate_wildcard-main-unkin-net.yaml
+  - certificate_wildcard-ceph-unkin-net.yaml

apps/base/cheeztv/plugin-configmap.yaml

@@ -26,7 +26,7 @@ data:
           </key>
           <value>
             <PluginConfiguration>
-              <OidEndpoint>https://identity.k8s.syd1.au.unkin.net/application/o/jellyfin/</OidEndpoint>
+              <OidEndpoint>https://identity.unkin.net/application/o/jellyfin/</OidEndpoint>
               <OidClientId>jellyfin</OidClientId>
               <OidSecret>@@CLIENT_SECRET@@</OidSecret>
               <Enabled>true</Enabled>

apps/base/cheeztv/service.yaml

@@ -13,6 +13,4 @@ spec:
       targetPort: http
   selector:
     app: cheeztv
-  # Pin each client to one replica to reduce transcode-session churn/takeover.
-  sessionAffinity: ClientIP
   type: ClusterIP

apps/base/cheeztv/statefulset.yaml

@@ -4,6 +4,8 @@ kind: StatefulSet
 metadata:
   name: cheeztv
   namespace: cheeztv
+  annotations:
+    configmap.reloader.stakater.com/auto: "true"
 spec:
   # HA: two replicas coordinate transcode session ownership through Valkey and
   # resume each other's HLS segments off the shared RWX transcode PVC. Stable
@@ -162,7 +164,7 @@ spec:
               readOnly: true
       containers:
         - name: cheeztv
-          image: artifactapi.k8s.syd1.au.unkin.net/docker-internal/jellyfin-ha:v0.2.0
+          image: artifactapi.k8s.syd1.au.unkin.net/docker-internal/jellyfin-ha:v0.4.0
           imagePullPolicy: IfNotPresent
           ports:
             - name: http

apps/base/fafflix/plugin-configmap.yaml

@@ -26,7 +26,7 @@ data:
           </key>
           <value>
             <PluginConfiguration>
-              <OidEndpoint>https://identity.k8s.syd1.au.unkin.net/application/o/jellyfin/</OidEndpoint>
+              <OidEndpoint>https://identity.unkin.net/application/o/jellyfin/</OidEndpoint>
               <OidClientId>jellyfin</OidClientId>
               <OidSecret>@@CLIENT_SECRET@@</OidSecret>
               <Enabled>true</Enabled>

apps/base/fafflix/service.yaml

@@ -13,6 +13,4 @@ spec:
       targetPort: http
   selector:
     app: fafflix
-  # Pin each client to one replica to reduce transcode-session churn/takeover.
-  sessionAffinity: ClientIP
   type: ClusterIP

apps/base/fafflix/statefulset.yaml

@@ -4,6 +4,8 @@ kind: StatefulSet
 metadata:
   name: fafflix
   namespace: fafflix
+  annotations:
+    configmap.reloader.stakater.com/auto: "true"
 spec:
   # HA: two replicas coordinate transcode session ownership through Valkey and
   # resume each other's HLS segments off the shared RWX transcode PVC. Stable
@@ -162,7 +164,7 @@ spec:
               readOnly: true
       containers:
         - name: fafflix
-          image: artifactapi.k8s.syd1.au.unkin.net/docker-internal/jellyfin-ha:v0.2.0
+          image: artifactapi.k8s.syd1.au.unkin.net/docker-internal/jellyfin-ha:v0.4.0
           imagePullPolicy: IfNotPresent
           ports:
             - name: http

apps/base/grafana/grafanadatasource.yaml

@@ -20,3 +20,22 @@ spec:
     jsonData:
       timeInterval: "15s"
       httpMethod: "POST"
+---
+apiVersion: grafana.integreatly.org/v1beta1
+kind: GrafanaDatasource
+metadata:
+  name: victorialogs
+  namespace: grafana
+spec:
+  instanceSelector:
+    matchLabels:
+      dashboards: "grafana"
+  plugins:
+    - name: victoriametrics-logs-datasource
+      version: 0.32.0
+  datasource:
+    name: "VictoriaLogs"
+    type: "victoriametrics-logs-datasource"
+    uid: "victorialogs"
+    access: "proxy"
+    url: "http://vlselect-logs.logging.svc.cluster.local:9471"

apps/base/haproxy/configmap.yaml

@@ -0,0 +1,274 @@
+---
+apiVersion: v1
+kind: ConfigMap
+metadata:
+  name: haproxy-config
+  namespace: haproxy
+data:
+  certificate.list: |
+    # First entry is the default cert for non-matching SNI.
+    /etc/haproxy/certs/unkin-net/tls.crt
+    /etc/haproxy/certs/main-unkin-net/tls.crt
+    /etc/haproxy/certs/ceph-unkin-net/tls.crt
+
+  fe_https.map: |
+    sonarr.main.unkin.net be_sonarr
+    radarr.main.unkin.net be_radarr
+    lidarr.main.unkin.net be_lidarr
+    readarr.main.unkin.net be_readarr
+    prowlarr.main.unkin.net be_prowlarr
+    nzbget.main.unkin.net be_nzbget
+    jellyfin.main.unkin.net be_jellyfin
+    fafflix.unkin.net be_jellyfin
+    git.unkin.net be_gitea
+    grafana.unkin.net be_grafana
+    dashboard.ceph.unkin.net be_ceph_dashboard
+    auth.unkin.net be_k8s_kanidm
+
+  haproxy.cfg: |
+    global
+      log stdout format raw local0
+      log stdout format raw local1 notice
+      maxconn  4000
+      hard-stop-after  2m
+      ssl-default-bind-ciphers  EECDH+AESGCM:EDH+AESGCM:AES256+EECDH:AES256+EDH
+      ssl-default-bind-options  ssl-min-ver TLSv1.2 ssl-max-ver TLSv1.3
+      ssl-default-server-ciphers  kEECDH+aRSA+AES:kRSA+AES:+AES256:RC4-SHA:!kEDH:!LOW:!EXP:!MD5:!aNULL:!eNULL
+      ssl-default-server-options  no-sslv3
+      stats  timeout 30s
+      stats  socket /var/lib/haproxy/stats
+      stats  socket /var/lib/haproxy/admin.sock mode 660 level admin
+      tune.ssl.default-dh-param  2048
+
+    defaults
+      log  global
+      maxconn  5000
+      mode  http
+      option  httplog
+      option  dontlognull
+      option  http-server-close
+      option  forwardfor except 127.0.0.0/8
+      option  redispatch
+      retries  3
+      stats  enable
+      timeout  http-request 10s
+      timeout  queue 1m
+      timeout  connect 10s
+      timeout  client 5m
+      timeout  server 5m
+      timeout  http-keep-alive 10s
+      timeout  check 10s
+
+    frontend fe_https
+      bind 0.0.0.0:443 ssl crt-list /usr/local/etc/haproxy/certificate.list ciphers EECDH+AESGCM:EDH+AESGCM:AES256+EECDH:AES256+EDH force-tlsv12
+      mode http
+      description Global HTTPS Frontend
+      http-request set-header X-Forwarded-Proto https
+      http-request set-header X-Real-IP %[src]
+      http-response set-header X-Content-Type-Options nosniff
+      http-response set-header X-XSS-Protection 1;mode=block
+      use_backend %[req.hdr(host),lower,map(/usr/local/etc/haproxy/fe_https.map,be_default)]
+
+    frontend fe_metrics
+      bind 0.0.0.0:8405
+      mode http
+      description Metrics Frontend
+      http-request set-header X-Forwarded-Proto https
+      http-request set-header X-Real-IP %[src]
+      http-request use-service prometheus-exporter if { path /metrics }
+
+    backend be_ceph_dashboard
+      description Backend for Ceph Dashboard from Mgr instances
+      balance roundrobin
+      cookie SRVNAME insert indirect nocache
+      http-check expect status 200
+      http-request set-header X-Forwarded-Port %[dst_port]
+      http-request add-header X-Forwarded-Proto https if { dst_port 9443 }
+      http-reuse always
+      option httpchk GET /
+      option forwardfor
+      option http-keep-alive
+      option prefer-last-server
+      redirect scheme https if !{ ssl_fc }
+      stick-table type ip size 200k expire 30m
+      server prodnxsr0009 198.18.23.9:9443 check cookie prodnxsr0009 fall 2 inter 2s rise 3 ssl verify none
+      server prodnxsr0010 198.18.23.10:9443 check cookie prodnxsr0010 fall 2 inter 2s rise 3 ssl verify none
+      server prodnxsr0011 198.18.23.11:9443 check cookie prodnxsr0011 fall 2 inter 2s rise 3 ssl verify none
+      server prodnxsr0012 198.18.23.12:9443 check cookie prodnxsr0012 fall 2 inter 2s rise 3 ssl verify none
+      server prodnxsr0013 198.18.23.13:9443 check cookie prodnxsr0013 fall 2 inter 2s rise 3 ssl verify none
+
+    backend be_default
+      description Backend for unmatched HTTP traffic
+      balance roundrobin
+      cookie SRVNAME insert
+      http-request set-header X-Forwarded-Port %[dst_port]
+      http-request add-header X-Forwarded-Proto https if { dst_port 443 }
+      option httpchk GET /
+      option forwardfor
+
+    backend be_gitea
+      description Backend for gitea cluster
+      balance roundrobin
+      cookie SRVNAME insert indirect nocache
+      http-request set-header X-Forwarded-Port %[dst_port]
+      http-request add-header X-Forwarded-Proto https if { dst_port 443 }
+      http-reuse always
+      option httpchk GET /
+      option forwardfor
+      option http-keep-alive
+      option prefer-last-server
+      redirect scheme https if !{ ssl_fc }
+      stick on src
+      stick-table type ip size 200k expire 30m
+      server ausyd1nxvm2080 198.18.26.18:443 check cookie ausyd1nxvm2080 fall 2 inter 2s rise 3 ssl verify none
+      server ausyd1nxvm2081 198.18.27.117:443 check cookie ausyd1nxvm2081 fall 2 inter 2s rise 3 ssl verify none
+      server ausyd1nxvm2082 198.18.28.71:443 check cookie ausyd1nxvm2082 fall 2 inter 2s rise 3 ssl verify none
+
+    backend be_grafana
+      description Backend for grafana nodes
+      balance roundrobin
+      cookie SRVNAME insert indirect nocache
+      http-request set-header X-Forwarded-Port %[dst_port]
+      http-request add-header X-Forwarded-Proto https if { dst_port 443 }
+      http-reuse always
+      option httpchk GET /
+      option forwardfor
+      option http-keep-alive
+      option prefer-last-server
+      redirect scheme https if !{ ssl_fc }
+      stick on src
+      stick-table type ip size 200k expire 30m
+      server ausyd1nxvm2015 198.18.27.2:443 check cookie ausyd1nxvm2015 fall 2 inter 2s rise 3 ssl verify none
+      server ausyd1nxvm2016 198.18.28.189:443 check cookie ausyd1nxvm2016 fall 2 inter 2s rise 3 ssl verify none
+
+    backend be_jellyfin
+      description Backend for au-syd1 jellyfin
+      balance roundrobin
+      cookie SRVNAME insert indirect nocache
+      http-request set-header X-Forwarded-Port %[dst_port]
+      http-request add-header X-Forwarded-Proto https if { dst_port 443 }
+      http-reuse always
+      option httpchk GET /
+      option forwardfor
+      option http-keep-alive
+      option prefer-last-server
+      redirect scheme https if !{ ssl_fc }
+      server ausyd1nxvm2051 198.18.25.164:443 check cookie ausyd1nxvm2051 fall 2 inter 2s rise 3 ssl verify none
+
+    backend be_k8s_kanidm
+      description Backend for Kanidm (auth.unkin.net via Kubernetes internal Traefik)
+      balance roundrobin
+      http-reuse always
+      http-request set-header X-Forwarded-Port %[dst_port]
+      http-request add-header X-Forwarded-Proto https if { dst_port 443 }
+      redirect scheme https if !{ ssl_fc }
+      option httpchk
+      option forwardfor
+      option http-keep-alive
+      option prefer-last-server
+      http-check connect ssl sni auth.unkin.net
+      http-check send meth GET uri /status ver HTTP/1.1 hdr Host auth.unkin.net
+      http-check expect status 200
+      server k8s-traefik-internal 198.18.200.4:443 ssl verify none check inter 2s rise 3 fall 2 sni str(auth.unkin.net)
+
+    backend be_lidarr
+      description Backend for au-syd1 lidarr
+      balance roundrobin
+      cookie SRVNAME insert indirect nocache
+      http-request set-header X-Forwarded-Port %[dst_port]
+      http-request add-header X-Forwarded-Proto https if { dst_port 443 }
+      http-reuse always
+      option httpchk GET /consul/health
+      option forwardfor
+      option http-keep-alive
+      option prefer-last-server
+      redirect scheme https if !{ ssl_fc }
+      server ausyd1nxvm2048 198.18.28.165:443 check cookie ausyd1nxvm2048 fall 2 inter 2s rise 3 ssl verify none
+
+    backend be_nzbget
+      description Backend for au-syd1 nzbget
+      balance roundrobin
+      cookie SRVNAME insert indirect nocache
+      http-request set-header X-Forwarded-Port %[dst_port]
+      http-request add-header X-Forwarded-Proto https if { dst_port 443 }
+      http-reuse always
+      option httpchk GET /consul/health
+      option forwardfor
+      option http-keep-alive
+      option prefer-last-server
+      redirect scheme https if !{ ssl_fc }
+      server ausyd1nxvm2045 198.18.25.44:443 check cookie ausyd1nxvm2045 fall 2 inter 2s rise 3 ssl verify none
+
+    backend be_prowlarr
+      description Backend for au-syd1 prowlarr
+      balance roundrobin
+      cookie SRVNAME insert indirect nocache
+      http-request set-header X-Forwarded-Port %[dst_port]
+      http-request add-header X-Forwarded-Proto https if { dst_port 443 }
+      http-reuse always
+      option httpchk GET /consul/health
+      option forwardfor
+      option http-keep-alive
+      option prefer-last-server
+      redirect scheme https if !{ ssl_fc }
+      server ausyd1nxvm2050 198.18.25.66:443 check cookie ausyd1nxvm2050 fall 2 inter 2s rise 3 ssl verify none
+
+    backend be_radarr
+      description Backend for au-syd1 radarr
+      balance roundrobin
+      cookie SRVNAME insert indirect nocache
+      http-request set-header X-Forwarded-Port %[dst_port]
+      http-request add-header X-Forwarded-Proto https if { dst_port 443 }
+      http-reuse always
+      option httpchk GET /consul/health
+      option forwardfor
+      option http-keep-alive
+      option prefer-last-server
+      redirect scheme https if !{ ssl_fc }
+      server ausyd1nxvm2047 198.18.27.131:443 check cookie ausyd1nxvm2047 fall 2 inter 2s rise 3 ssl verify none
+
+    backend be_readarr
+      description Backend for au-syd1 readarr
+      balance roundrobin
+      cookie SRVNAME insert indirect nocache
+      http-request set-header X-Forwarded-Port %[dst_port]
+      http-request add-header X-Forwarded-Proto https if { dst_port 443 }
+      http-reuse always
+      option httpchk GET /consul/health
+      option forwardfor
+      option http-keep-alive
+      option prefer-last-server
+      redirect scheme https if !{ ssl_fc }
+      server ausyd1nxvm2049 198.18.29.32:443 check cookie ausyd1nxvm2049 fall 2 inter 2s rise 3 ssl verify none
+
+    backend be_sonarr
+      description Backend for au-syd1 sonarr
+      balance roundrobin
+      cookie SRVNAME insert indirect nocache
+      http-request set-header X-Forwarded-Port %[dst_port]
+      http-request add-header X-Forwarded-Proto https if { dst_port 443 }
+      http-reuse always
+      option httpchk GET /consul/health
+      option forwardfor
+      option http-keep-alive
+      option prefer-last-server
+      redirect scheme https if !{ ssl_fc }
+      server ausyd1nxvm2046 198.18.26.161:443 check cookie ausyd1nxvm2046 fall 2 inter 2s rise 3 ssl verify none
+
+    # The `peers au-syd1-prod` section is dropped: peer names must be static and a
+    # Deployment cannot provide them. Behind the external Traefik's TLS
+    # passthrough `src` is a Traefik pod, so X-Real-IP, forwardfor and the
+    # `stick on src` tables all key on that; the SRVNAME cookie carries real
+    # session persistence. Traefik cannot emit PROXY protocol to a TLSRoute
+    # backend, so there is nothing to bind `accept-proxy` to.
+
+    listen health
+      bind 0.0.0.0:8404
+      mode http
+      monitor-uri /healthz
+
+    listen stats
+      bind 127.0.0.1:9090
+      mode http
+      stats uri /
+      stats auth admin:admin

apps/base/haproxy/deployment.yaml

@@ -0,0 +1,148 @@
+---
+apiVersion: apps/v1
+kind: Deployment
+metadata:
+  name: haproxy
+  namespace: haproxy
+  annotations:
+    reloader.stakater.com/auto: "true"
+spec:
+  replicas: 3
+  selector:
+    matchLabels:
+      app: haproxy
+  strategy:
+    type: RollingUpdate
+    rollingUpdate:
+      maxUnavailable: 1
+  template:
+    metadata:
+      labels:
+        app: haproxy
+    spec:
+      automountServiceAccountToken: false
+      terminationGracePeriodSeconds: 150
+      affinity:
+        podAntiAffinity:
+          requiredDuringSchedulingIgnoredDuringExecution:
+            - labelSelector:
+                matchLabels:
+                  app: haproxy
+              topologyKey: kubernetes.io/hostname
+      securityContext:
+        runAsNonRoot: true
+        runAsUser: 99
+        runAsGroup: 99
+        seccompProfile:
+          type: RuntimeDefault
+      containers:
+        - name: haproxy
+          image: haproxy:3.2.24-alpine
+          imagePullPolicy: IfNotPresent
+          command:
+            - haproxy
+            - -W
+            - -db
+            - -f
+            - /usr/local/etc/haproxy/haproxy.cfg
+          securityContext:
+            allowPrivilegeEscalation: false
+            readOnlyRootFilesystem: true
+            capabilities:
+              drop: [ALL]
+              # fe_https binds the privileged port 443 as uid 99, and the
+              # dst_port ACLs need the real port.
+              add: [NET_BIND_SERVICE]
+          ports:
+            - name: https
+              containerPort: 443
+              protocol: TCP
+            - name: health
+              containerPort: 8404
+              protocol: TCP
+            - name: metrics
+              containerPort: 8405
+              protocol: TCP
+            - name: stats
+              containerPort: 9090
+              protocol: TCP
+          lifecycle:
+            preStop:
+              exec:
+                # SIGUSR1 to the master soft-stops the workers; hard-stop-after
+                # caps the drain. Wait so kubelet holds SIGTERM until it is done.
+                command:
+                  - /bin/sh
+                  - -c
+                  - kill -s USR1 1; while kill -0 1 2>/dev/null; do sleep 1; done
+          livenessProbe:
+            httpGet:
+              path: /healthz
+              port: health
+            initialDelaySeconds: 15
+            periodSeconds: 30
+            timeoutSeconds: 5
+            failureThreshold: 3
+          readinessProbe:
+            httpGet:
+              path: /healthz
+              port: health
+            initialDelaySeconds: 5
+            periodSeconds: 5
+            timeoutSeconds: 5
+            failureThreshold: 3
+          resources:
+            requests:
+              cpu: 200m
+              memory: 256Mi
+            limits:
+              cpu: 2
+              memory: 1Gi
+          volumeMounts:
+            - name: config
+              mountPath: /usr/local/etc/haproxy
+              readOnly: true
+            - name: cert-unkin-net
+              mountPath: /etc/haproxy/certs/unkin-net
+              readOnly: true
+            - name: cert-main-unkin-net
+              mountPath: /etc/haproxy/certs/main-unkin-net
+              readOnly: true
+            - name: cert-ceph-unkin-net
+              mountPath: /etc/haproxy/certs/ceph-unkin-net
+              readOnly: true
+            - name: run
+              mountPath: /var/lib/haproxy
+      volumes:
+        - name: config
+          configMap:
+            name: haproxy-config
+        # ssl-load-extra-files loads <crtfile>.key by default, so the key is
+        # projected next to the cert as tls.crt.key.
+        - name: cert-unkin-net
+          secret:
+            secretName: wildcard-unkin-net-tls
+            items:
+              - key: tls.crt
+                path: tls.crt
+              - key: tls.key
+                path: tls.crt.key
+        - name: cert-main-unkin-net
+          secret:
+            secretName: wildcard-main-unkin-net-tls
+            items:
+              - key: tls.crt
+                path: tls.crt
+              - key: tls.key
+                path: tls.crt.key
+        - name: cert-ceph-unkin-net
+          secret:
+            secretName: wildcard-ceph-unkin-net-tls
+            items:
+              - key: tls.crt
+                path: tls.crt
+              - key: tls.key
+                path: tls.crt.key
+        - name: run
+          emptyDir: {}
+      restartPolicy: Always

apps/base/haproxy/gateway.yaml

@@ -0,0 +1,31 @@
+---
+# External (DMZ) front for the haproxy edge on the traefik-external LB VIP
+# 198.18.199.0. The :443 listener is TLS Passthrough: haproxy owns the three
+# wildcard certs and terminates behind Traefik, so there are no certificateRefs
+# here. Listener hostnames are deliberately unset and the routes carry the
+# explicit hostname list instead; allowedRoutes Same keeps other namespaces off
+# these listeners.
+apiVersion: gateway.networking.k8s.io/v1
+kind: Gateway
+metadata:
+  name: haproxy
+  namespace: haproxy
+  labels:
+    traefik.io/instance: external
+spec:
+  gatewayClassName: traefik-external
+  listeners:
+    - name: http
+      port: 80
+      protocol: HTTP
+      allowedRoutes:
+        namespaces:
+          from: Same
+    - name: https-passthrough
+      port: 443
+      protocol: TLS
+      tls:
+        mode: Passthrough
+      allowedRoutes:
+        namespaces:
+          from: Same

apps/base/haproxy/httproute.yaml

@@ -0,0 +1,37 @@
+---
+apiVersion: gateway.networking.k8s.io/v1
+kind: HTTPRoute
+metadata:
+  name: haproxy-http-redirect
+  namespace: haproxy
+  labels:
+    app: haproxy
+spec:
+  hostnames:
+    - sonarr.main.unkin.net
+    - radarr.main.unkin.net
+    - lidarr.main.unkin.net
+    - readarr.main.unkin.net
+    - prowlarr.main.unkin.net
+    - nzbget.main.unkin.net
+    - jellyfin.main.unkin.net
+    - fafflix.unkin.net
+    - git.unkin.net
+    - grafana.unkin.net
+    - dashboard.ceph.unkin.net
+    - auth.unkin.net
+  parentRefs:
+    - group: gateway.networking.k8s.io
+      kind: Gateway
+      name: haproxy
+      sectionName: http
+  rules:
+    - filters:
+        - type: RequestRedirect
+          requestRedirect:
+            scheme: https
+            statusCode: 301
+      matches:
+        - path:
+            type: PathPrefix
+            value: /

apps/base/haproxy/kustomization.yaml

@@ -0,0 +1,15 @@
+---
+apiVersion: kustomize.config.k8s.io/v1beta1
+kind: Kustomization
+
+resources:
+  - namespace.yaml
+  - configmap.yaml
+  - deployment.yaml
+  - service.yaml
+  - gateway.yaml
+  - tlsroute.yaml
+  - httproute.yaml
+  - pdb.yaml
+  - vpa.yaml
+  - vmpodscrape.yaml

apps/base/haproxy/namespace.yaml

@@ -0,0 +1,5 @@
+---
+apiVersion: v1
+kind: Namespace
+metadata:
+  name: haproxy

apps/base/haproxy/pdb.yaml

@@ -0,0 +1,11 @@
+---
+apiVersion: policy/v1
+kind: PodDisruptionBudget
+metadata:
+  name: haproxy
+  namespace: haproxy
+spec:
+  maxUnavailable: 1
+  selector:
+    matchLabels:
+      app: haproxy

apps/base/haproxy/service.yaml

@@ -0,0 +1,19 @@
+---
+apiVersion: v1
+kind: Service
+metadata:
+  name: haproxy
+  namespace: haproxy
+spec:
+  type: ClusterIP
+  # Reached only by the external Traefik's TLS-passthrough TLSRoute, so the
+  # peer address here is a Traefik pod, not the client. sessionAffinity is
+  # deliberately absent: keyed on ClientIP it would pin whole Traefik pods,
+  # not clients. Backend persistence rests on the per-backend SRVNAME cookie.
+  selector:
+    app: haproxy
+  ports:
+    - name: https
+      port: 443
+      protocol: TCP
+      targetPort: https

apps/base/haproxy/tlsroute.yaml

@@ -0,0 +1,34 @@
+---
+apiVersion: gateway.networking.k8s.io/v1
+kind: TLSRoute
+metadata:
+  name: haproxy
+  namespace: haproxy
+  labels:
+    app: haproxy
+spec:
+  hostnames:
+    - sonarr.main.unkin.net
+    - radarr.main.unkin.net
+    - lidarr.main.unkin.net
+    - readarr.main.unkin.net
+    - prowlarr.main.unkin.net
+    - nzbget.main.unkin.net
+    - jellyfin.main.unkin.net
+    - fafflix.unkin.net
+    - git.unkin.net
+    - grafana.unkin.net
+    - dashboard.ceph.unkin.net
+    - auth.unkin.net
+  parentRefs:
+    - group: gateway.networking.k8s.io
+      kind: Gateway
+      name: haproxy
+      sectionName: https-passthrough
+  rules:
+    - backendRefs:
+        - group: ""
+          kind: Service
+          name: haproxy
+          port: 443
+          weight: 1

apps/base/haproxy/vmpodscrape.yaml

@@ -0,0 +1,13 @@
+---
+apiVersion: operator.victoriametrics.com/v1beta1
+kind: VMPodScrape
+metadata:
+  name: haproxy
+  namespace: haproxy
+spec:
+  selector:
+    matchLabels:
+      app: haproxy
+  podMetricsEndpoints:
+    - port: metrics
+      path: /metrics

apps/base/haproxy/vpa.yaml

@@ -0,0 +1,13 @@
+---
+apiVersion: autoscaling.k8s.io/v1
+kind: VerticalPodAutoscaler
+metadata:
+  name: haproxy-vpa
+  namespace: haproxy
+spec:
+  targetRef:
+    apiVersion: apps/v1
+    kind: Deployment
+    name: haproxy
+  updatePolicy:
+    updateMode: "Off"

apps/base/logging/gateway.yaml

@@ -1,16 +1,13 @@
 ---
-# Log ingestion endpoint for puppet-managed VMs (and any non-k8s client).
+# Log ingestion endpoint for puppet-managed VMs (and any non-k8s client):
-# Reuses the internal Traefik gateway + cert-manager + external-dns pattern so
+# fronts the VLCluster vlinsert service over TLS at a name VMs can resolve.
-# VMs reach the Vector aggregator's HTTP source over TLS at a DNS name they can
-# resolve. The puppet-side Vector rollout ships NDJSON to
-# https://logs-ingest.k8s.syd1.au.unkin.net/ (a later task).
 apiVersion: gateway.networking.k8s.io/v1
 kind: Gateway
 metadata:
   name: logs-ingest
   namespace: logging
   labels:
-    app.kubernetes.io/name: vector-aggregator
+    app.kubernetes.io/name: victorialogs
     app.kubernetes.io/component: ingest
     traefik.io/instance: internal
   annotations:

apps/base/logging/httproute.yaml

@@ -5,7 +5,7 @@ metadata:
   name: logs-ingest-http-redirect
   namespace: logging
   labels:
-    app.kubernetes.io/name: vector-aggregator
+    app.kubernetes.io/name: victorialogs
     app.kubernetes.io/component: ingest
 spec:
   hostnames:
@@ -32,7 +32,7 @@ metadata:
   name: logs-ingest
   namespace: logging
   labels:
-    app.kubernetes.io/name: vector-aggregator
+    app.kubernetes.io/name: victorialogs
     app.kubernetes.io/component: ingest
 spec:
   hostnames:
@@ -46,8 +46,8 @@ spec:
     - backendRefs:
         - group: ""
           kind: Service
-          name: vector-vm-ingest
+          name: vlinsert-logs
-          port: 8080
+          port: 9481
           weight: 1
       matches:
         - path:

apps/base/logging/kustomization.yaml

@@ -10,6 +10,7 @@ resources:
   - job_clickhouse-schema.yaml
   - nats-bootstrap-job.yaml
   - cephrgw.yaml
+  - vlcluster.yaml
   - gateway.yaml
   - httproute.yaml
   - serviceaccount_logarchiver.yaml

apps/base/logging/vlcluster.yaml

@@ -0,0 +1,47 @@
+---
+apiVersion: operator.victoriametrics.com/v1
+kind: VLCluster
+metadata:
+  name: logs
+  namespace: logging
+spec:
+  clusterVersion: v1.52.0
+  vlinsert:
+    replicaCount: 2
+    resources:
+      requests:
+        cpu: 500m
+        memory: 1Gi
+      limits:
+        cpu: "2"
+        memory: 4Gi
+  vlselect:
+    replicaCount: 2
+    resources:
+      requests:
+        cpu: 500m
+        memory: 1Gi
+      limits:
+        cpu: "2"
+        memory: 4Gi
+  vlstorage:
+    replicaCount: 3
+    retentionPeriod: 180d
+    # ~3 GiB/day measured; 220GiB/node cap keeps 180d time-based, not disk-bound
+    retentionMaxDiskSpaceUsageBytes: 220GiB
+    storage:
+      volumeClaimTemplate:
+        spec:
+          accessModes:
+            - ReadWriteOnce
+          storageClassName: cephrbd-fast-delete
+          resources:
+            requests:
+              storage: 250Gi
+    resources:
+      requests:
+        cpu: "1"
+        memory: 2Gi
+      limits:
+        cpu: "4"
+        memory: 8Gi

apps/base/puppet/cronjob_g10k-code.yaml

@@ -11,11 +11,13 @@ metadata:
   namespace: puppet
 spec:
   schedule: "*/1 * * * *"
+  startingDeadlineSeconds: 200
   concurrencyPolicy: Forbid
   successfulJobsHistoryLimit: 3
   failedJobsHistoryLimit: 3
   jobTemplate:
     spec:
+      activeDeadlineSeconds: 300
       template:
         metadata:
           labels:

apps/base/puppet/deployment_puppetserver-compiler.yaml

@@ -105,6 +105,17 @@ spec:
         - mountPath: /docker-custom-entrypoint.d/pre-default/10-auth-conf.sh
           name: compiler-auth-conf-seed
           subPath: 10-auth-conf.sh
+        - mountPath: /docker-custom-entrypoint.d/pre-default/20-vault-helpers.sh
+          name: compiler-vault-helpers-seed
+          subPath: 20-vault-helpers.sh
+        - mountPath: /opt/certmanager/config.yaml
+          name: certmanager-config
+          subPath: certmanager.yaml
+          readOnly: true
+        - mountPath: /opt/sshsignhost/config.yaml
+          name: sshsignhost-config
+          subPath: sshsignhost.yaml
+          readOnly: true
       initContainers:
       - name: copy-configmaps
         image: busybox:1.35
@@ -202,7 +213,38 @@ spec:
           echo "$EXPECTED  encapic" | sha256sum -c -
           install -m 0755 encapic /opt/bin/encapic
 
+          # Puppet shells out to these two from generate() during catalog
+          # compilation: profiles::pki::vault runs certmanager and
+          # profiles::ssh::sign runs sshsignhost.
+          install_release() {
+            name=$1
+            version=$2
+            asset="$name-linux-amd64"
+            base="https://git.unkin.net/unkin/$name/releases/download/$version"
+            curl -fsSL -o "$name" "$base/$asset"
+            curl -fsSL -o "$name.checksums" "$base/checksums.txt"
+            # checksums.txt covers every release asset; pick the line for the
+            # one we downloaded and verify it under our local filename.
+            expected=$(awk -v a="$asset" '$NF == a || $NF == "*"a {print $1}' "$name.checksums")
+            if [ -z "$expected" ]; then
+              echo "no checksum for $asset in $version checksums.txt" >&2
+              exit 1
+            fi
+            echo "$expected  $name" | sha256sum -c -
+            install -m 0755 "$name" "/opt/bin/$name"
+          }
+
+          install_release certmanager v0.2.0
+          install_release sshsignhost v0.1.0
+
           echo "Shared binaries setup completed"
+        resources:
+          limits:
+            cpu: 300m
+            memory: 256Mi
+          requests:
+            cpu: 100m
+            memory: 64Mi
         volumeMounts:
         - mountPath: /opt/bin/
           name: puppet-shared-bins
@@ -247,5 +289,15 @@ spec:
         configMap:
           name: compiler-auth-conf-seed
           defaultMode: 0755
+      - name: compiler-vault-helpers-seed
+        configMap:
+          name: compiler-vault-helpers-seed
+          defaultMode: 0755
+      - name: certmanager-config
+        configMap:
+          name: certmanager-config
+      - name: sshsignhost-config
+        configMap:
+          name: sshsignhost-config
   strategy:
     type: RollingUpdate

apps/base/puppet/kustomization.yaml

@@ -64,6 +64,21 @@ configMapGenerator:
       - resources/compiler/10-auth-conf.sh
     options:
       disableNameSuffixHash: true
+  - name: compiler-vault-helpers-seed
+    files:
+      - resources/compiler/20-vault-helpers.sh
+    options:
+      disableNameSuffixHash: true
+  - name: certmanager-config
+    files:
+      - resources/compiler/certmanager.yaml
+    options:
+      disableNameSuffixHash: true
+  - name: sshsignhost-config
+    files:
+      - resources/compiler/sshsignhost.yaml
+    options:
+      disableNameSuffixHash: true
   - name: additional-ruby-gems
     files:
       - resources/additional-ruby-gems.sh

apps/base/puppet/resources/additional-ruby-gems.sh

@@ -6,4 +6,6 @@ echo "Installing additional Ruby gems..."
 /opt/puppetlabs/puppet/bin/gem install ipaddr
 /opt/puppetlabs/puppet/bin/gem install hiera-eyaml
 /opt/puppetlabs/puppet/bin/gem install toml
+# Under set -e a failed install kills the entrypoint post-startup hooks, taking down an already-serving compiler.
+/opt/puppetlabs/bin/puppetserver gem install toml
 echo "Additional Ruby gems installed successfully"

apps/base/puppet/resources/compiler/20-vault-helpers.sh

@@ -0,0 +1,29 @@
+#!/bin/bash
+set -euo pipefail
+
+BIN_DIR=/opt/bin
+CA=/opt/vault-ca-cert.crt
+
+if [ ! -s "$CA" ]; then
+  echo "FATAL: $CA missing or empty; certmanager and sshsignhost cannot verify Vault" >&2
+  exit 1
+fi
+
+# profiles::pki::vault and profiles::ssh::sign shell out to fixed /usr/local/bin
+# paths from generate(); the binaries ship on the shared PVC, and /usr/local/bin
+# lives in the image. Wrappers rather than symlinks because neither binary reads
+# a CA path from its config: SSL_CERT_FILE scopes the internal CA to these two
+# processes instead of the puppetserver JVM's own trust store.
+for bin in certmanager sshsignhost; do
+  if [ ! -x "$BIN_DIR/$bin" ]; then
+    echo "FATAL: $BIN_DIR/$bin missing; generate() would abort every catalog compile" >&2
+    exit 1
+  fi
+  cat > "/usr/local/bin/$bin" <<WRAPPER
+#!/bin/sh
+SSL_CERT_FILE=$CA
+export SSL_CERT_FILE
+exec $BIN_DIR/$bin "\$@"
+WRAPPER
+  chmod 0755 "/usr/local/bin/$bin"
+done

apps/base/puppet/resources/compiler/certmanager.yaml

@@ -0,0 +1,12 @@
+---
+vault:
+  addr: https://vault.service.consul:8200
+  auth_method: kubernetes
+  k8s_mount: k8s/au/syd1
+  k8s_role: puppet_certmanager
+  jwt_path: /var/run/secrets/kubernetes.io/serviceaccount/token
+  mount_point: pki_int
+  role_name: servers_default
+  output_path: /tmp/certmanager
+  tls_skip_verify: false
+  timeout: 30s

apps/base/puppet/resources/compiler/sshsignhost.yaml

@@ -0,0 +1,11 @@
+---
+vault:
+  addr: https://vault.service.consul:8200
+  auth_method: kubernetes
+  k8s_mount: k8s/au/syd1
+  k8s_role: puppet_sshsigner
+  jwt_path: /var/run/secrets/kubernetes.io/serviceaccount/token
+  mount_point: sshca
+  role_name: signhost
+  tls_skip_verify: false
+  timeout: 30s

apps/base/woodpecker/configmap_gocache-nginx.yaml

@@ -0,0 +1,39 @@
+---
+apiVersion: v1
+kind: ConfigMap
+metadata:
+  name: gocache-nginx
+  namespace: woodpecker
+  labels:
+    app.kubernetes.io/name: gocache
+    app.kubernetes.io/component: proxy
+data:
+  nginx.conf: |
+    worker_processes auto;
+    error_log /dev/stderr warn;
+    pid /tmp/nginx.pid;
+
+    events {
+      worker_connections 512;
+    }
+
+    # GOCACHEPROG is a raw byte stream, not HTTP, so this must be stream{} not http{}.
+    stream {
+      server {
+        listen 9090;
+
+        # The protocol has no authentication: anyone who can reach this port can
+        # write cache entries, which become code in every build that reads them.
+        # Loopback is the kubectl port-forward fallback; in a pod netns it is
+        # only these two containers.
+        allow 127.0.0.1/32;
+        allow 10.10.12.200/32;
+        allow 10.42.0.0/16;
+        deny all;
+
+        # A connect session lasts the whole build; the 10m default cuts long builds off.
+        proxy_timeout 2h;
+        proxy_connect_timeout 5s;
+        proxy_pass 127.0.0.1:9080;
+      }
+    }

apps/base/woodpecker/deployment_gocache.yaml

@@ -0,0 +1,131 @@
+---
+apiVersion: apps/v1
+kind: Deployment
+metadata:
+  name: gocache
+  namespace: woodpecker
+  annotations:
+    configmap.reloader.stakater.com/reload: "gocache-nginx"
+    secret.reloader.stakater.com/reload: "gocache-s3,vault-ca-cert"
+  labels:
+    app.kubernetes.io/name: gocache
+    app.kubernetes.io/component: cache
+spec:
+  replicas: 1
+  strategy:
+    type: Recreate
+  selector:
+    matchLabels:
+      app.kubernetes.io/name: gocache
+  template:
+    metadata:
+      labels:
+        app.kubernetes.io/name: gocache
+        app.kubernetes.io/component: cache
+    spec:
+      serviceAccountName: default
+      automountServiceAccountToken: false
+      securityContext:
+        runAsNonRoot: true
+        fsGroup: 65532
+        seccompProfile:
+          type: RuntimeDefault
+      containers:
+        - name: go-cache-plugin
+          image: artifactapi.k8s.syd1.au.unkin.net/docker-internal/go-cache-plugin:v0.1.0
+          imagePullPolicy: IfNotPresent
+          # Root flags must precede the subcommand; only --plugin belongs to serve.
+          args:
+            - --cache-dir=/var/cache/gocache
+            - --bucket=gocache
+            # Explicit region skips the GetBucketLocation probe, which RGW handles poorly.
+            - --region=us-east-1
+            - --s3-endpoint-url=https://s3.ceph.unkin.net
+            - --s3-path-style
+            - serve
+            - --plugin=9080
+          env:
+            - name: AWS_ACCESS_KEY_ID
+              valueFrom:
+                secretKeyRef:
+                  name: gocache-s3
+                  key: AWS_ACCESS_KEY_ID
+            - name: AWS_SECRET_ACCESS_KEY
+              valueFrom:
+                secretKeyRef:
+                  name: gocache-s3
+                  key: AWS_SECRET_ACCESS_KEY
+            # s3.ceph.unkin.net is served by the estate CA, not a public root.
+            - name: AWS_CA_BUNDLE
+              value: /etc/ssl/vault-ca/ca.crt
+          volumeMounts:
+            - name: cache
+              mountPath: /var/cache/gocache
+            - name: vault-ca
+              mountPath: /etc/ssl/vault-ca
+              readOnly: true
+          securityContext:
+            runAsUser: 65532
+            runAsGroup: 65532
+            allowPrivilegeEscalation: false
+            readOnlyRootFilesystem: true
+            capabilities:
+              drop:
+                - ALL
+          resources:
+            requests:
+              cpu: 200m
+              memory: 256Mi
+            limits:
+              cpu: "2"
+              memory: 2Gi
+        - name: nginx
+          image: docker.io/nginx:1.29.8-alpine
+          imagePullPolicy: IfNotPresent
+          # Bypass the image entrypoint: its config scripts write to a read-only rootfs.
+          command:
+            - nginx
+            - -g
+            - daemon off;
+          ports:
+            - containerPort: 9090
+              name: gocache
+              protocol: TCP
+          volumeMounts:
+            - name: nginx-config
+              mountPath: /etc/nginx/nginx.conf
+              subPath: nginx.conf
+              readOnly: true
+            - name: tmp
+              mountPath: /tmp
+          securityContext:
+            runAsUser: 101
+            runAsGroup: 101
+            allowPrivilegeEscalation: false
+            readOnlyRootFilesystem: true
+            capabilities:
+              drop:
+                - ALL
+          resources:
+            requests:
+              cpu: 25m
+              memory: 32Mi
+            limits:
+              cpu: 500m
+              memory: 128Mi
+      volumes:
+        # Staging cache in front of S3: losing it costs a repopulate, not data.
+        - name: cache
+          emptyDir:
+            sizeLimit: 20Gi
+        - name: nginx-config
+          configMap:
+            name: gocache-nginx
+        - name: tmp
+          emptyDir: {}
+        - name: vault-ca
+          secret:
+            secretName: vault-ca-cert
+            items:
+              - key: ca.crt
+                path: ca.crt

apps/base/woodpecker/gocache_bucket.yaml

@@ -0,0 +1,33 @@
+---
+# Shared Go build cache (GOCACHEPROG) for CI and developer laptops. Lives in the
+# woodpecker namespace because CI is the primary consumer and reads the Secret here.
+apiVersion: ceph.unkin.net/v1alpha1
+kind: ObjectStoreUser
+metadata:
+  name: gocache
+  namespace: woodpecker
+spec:
+  displayName: "Go build cache owner"
+  uid: gocache
+  maxBuckets: 1
+  secretName: gocache-s3
+  retainOnDelete: false
+---
+apiVersion: ceph.unkin.net/v1alpha1
+kind: Bucket
+metadata:
+  name: gocache
+  namespace: woodpecker
+spec:
+  bucketName: gocache
+  ownerRef: gocache
+  versioning: false
+  # No placementTarget: default (replicated) placement, not the ec target the
+  # backup buckets use — a build cache is millions of small objects.
+  tags:
+    app: gocache
+    purpose: go-build-cache
+  retainOnDelete: false
+  # A cache bucket is never empty, and the operator refuses to delete a
+  # non-empty bucket without this, wedging the finalizer.
+  purgeOnDelete: true

apps/base/woodpecker/kustomization.yaml

@@ -7,6 +7,10 @@ resources:
   - cnpg_cluster.yaml
   - cnpg_backup.yaml
   - cnpg_pooler.yaml
+  - gocache_bucket.yaml
+  - configmap_gocache-nginx.yaml
+  - deployment_gocache.yaml
+  - service_gocache.yaml
   - serviceaccount_arrproxy_ci.yaml
   - serviceaccount_autobackup_operator_ci.yaml
   - serviceaccount_ghp.yaml
@@ -15,6 +19,7 @@ resources:
   - serviceaccount_mediamark_ci.yaml
   - serviceaccount_plugin_docker_buildx.yaml
   - serviceaccount_jellyfin_ha_src.yaml
+  - serviceaccount_jellyfin_plugin_sso.yaml
   - serviceaccount_repospawner_ci.yaml
   - serviceaccount_terraform_artifactapi.yaml
   - serviceaccount_terraform_authentik.yaml

apps/base/woodpecker/service_gocache.yaml

@@ -0,0 +1,23 @@
+---
+apiVersion: v1
+kind: Service
+metadata:
+  name: gocache
+  namespace: woodpecker
+  annotations:
+    purelb.io/addresses: 198.18.200.11
+    purelb.io/service-group: common
+  labels:
+    app.kubernetes.io/name: gocache
+spec:
+  type: LoadBalancer
+  # Cluster SNATs off-node traffic to a node address, which would defeat the
+  # nginx allow rules; Local preserves the wireguard client IP.
+  externalTrafficPolicy: Local
+  selector:
+    app.kubernetes.io/name: gocache
+  ports:
+    - name: gocache
+      port: 9090
+      targetPort: gocache
+      protocol: TCP

apps/base/woodpecker/serviceaccount_jellyfin_plugin_sso.yaml

@@ -0,0 +1,6 @@
+---
+apiVersion: v1
+kind: ServiceAccount
+metadata:
+  name: jellyfin-plugin-sso
+  namespace: woodpecker

apps/overlays/au-syd1/haproxy/kustomization.yaml

@@ -0,0 +1,6 @@
+---
+apiVersion: kustomize.config.k8s.io/v1beta1
+kind: Kustomization
+
+resources:
+  - ../../../base/haproxy

apps/overlays/au-syd1/vm-system/kustomization.yaml

@@ -10,7 +10,7 @@ resources:
 helmCharts:
   - name: victoria-metrics-operator
     repo: https://victoriametrics.github.io/helm-charts/
-    version: "0.57.1"
+    version: "0.67.3"
     releaseName: victoria-metrics-operator
     namespace: vm-system
     valuesFile: values.yaml

argocd/applicationsets/platform.yaml

@@ -29,6 +29,7 @@ spec:
       - path: apps/overlays/*/ghp
       - path: apps/overlays/*/gitea
       - path: apps/overlays/*/grafana-system
+      - path: apps/overlays/*/haproxy
       - path: apps/overlays/*/inteldeviceplugins-system
       - path: apps/overlays/*/jfrog
       - path: apps/overlays/*/k8up-system

argocd/projects/platform.yaml

@@ -43,6 +43,8 @@ spec:
       server: https://kubernetes.default.svc
     - namespace: 'gitea'
       server: https://kubernetes.default.svc
+    - namespace: 'haproxy'
+      server: https://kubernetes.default.svc
     - namespace: 'jfrog'
       server: https://kubernetes.default.svc
     - namespace: 'kanidm'

clusters/au-syd1/bootstrap/argocd-cm-patch.yaml

@@ -26,6 +26,10 @@ data:
     issuer: https://identity.unkin.net/application/o/argocd/
     clientID: argocd
     clientSecret: $argocd-oidc:client_secret
+    # The Authentik client is public (the iOS app can't hold a secret), so
+    # Authentik no longer enforces clientSecret; PKCE replaces it as the
+    # protection against authorization-code interception.
+    enablePKCEAuthentication: true
     # identity.unkin.net now serves the LetsEncrypt *.unkin.net wildcard, so the
     # stock image trust store validates it; no rootCA pin.
     requestedScopes: